www.etrailer.comVideos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information. Today on this 2008 Toyota Highlander we will be installing the wiring harness part number 118449. The first thing I want to point out with this wiring harness before we get started is that it does come in two pieces. The larger piece with the larger 10 pin port is going to plug in underneath the dash on the interior of the vehicle. The second part which contains our 4-pole end is going to plug in at the rear back in our cargo area. We are going to start off by plugging the larger section in underneath the dash first. The port underneath the dash is located just left of the brake pedal attached to the main wiring harness lead right there. Now that we have the port located we can plug our harness in line and then we want to take the modulite box and we need to adhere it to a surface underneath the dash. We have got double sided tape on the back side so we can just peel that away and just find a place to adhere it. 00:54 There is actually a silver diagnostic box that provides a nice flat surface for us to adhere it to. With our modulite box adhered we just want to zip tie up any loose wires that you have underneath there and then we will go back to the cargo area and attach the second half of the wiring harness. Now we are in the rear cargo section of the vehicle and the connection point for our second section of our wiring harness is ...
Tags: 118449, 2008 Toyota Highlander, 2008, 08, Toyota, Highlander, Tow Ready, T-One, T-1, T One, T 1, vehicle wiring harness, vehicle wiring, wiring harness, wiring harness install, wire harness install, installation, custom fit vehicle wiring, custom vehicle wiring, etrailer.com
ไม่มีความคิดเห็น:
แสดงความคิดเห็น